FTSs Touch Jacketed Tank Kit

The FTSs Touch | Jacketed Tank Upgrade kit has been designed to leverage components from our home brewing FTSs Touch line in an effort to provide a low-cost solution to pair a 1, 2, or 3.5 BBL Jacketed Unitank and Jacketed Brite Tanks with one of our 3/8 HP or 3/4 HP glycol chillers.

This system features a custom TC thermowell adapter, along with a silicone insert to adapt the temperature probe from an FTSs Touch controller to the welded-in sleeved thermowell port on our line of Jacketed Tanks.  In addition, a custom-designed low-pressure open silicone check valve is included to prevent backflow to the chiller's reservoir when glycol is not flowing.  The kit includes 1/2" NPT to 3/8" barbs to adapt the glycol ports for use with our standard FTSs Touch pump. 

Since most Jacketed Tanks are set up for use with a pressurized loop glycol system typically found in commercial breweries, this kit offers a Nano brewery an affordable, easy-to-setup alternative to more elaborate or expensive installations.  Everything is included to interface a single Jacketed Tank between an FTSs Touch and Ss Glycol Chiller. 

Deisgned to work with 1, 2 and 3.5 bbl Jacketed Tanks

Includes:
4 - FTSs hose clamps for 3/8" barbs
1 - Hose barb - 3/8" to 1/2" MPT
1 - Silicone thermowell cover
1 - 1.5" TC sleeved thermowell adapter
1 - FTSs harness extension 3 ft.
1 - silicone check valve

NOT RECOMMENDED FOR 5 bbl & Larger Tanks